Planning and Maintenance Problems

Planning and Maintenance Problems Plan and Maintenance Problem 1 To calculate to peak operative temperature in this room in August, some assumes are made before calculation: The operative temperature in adjoining rooms is equal to that for the module under consideration and hence heat glow occur only through the outside window-wall; The window will be open during the day and close at night; The thermal transmittance of the window frame is equal to that of the glass; There are no internal blinds, therefor the solar gain to the air node is zero (Sa =0) According to the equation (5.42), this calculation will be divided into three parts. First, find out the mean operative temperature. Second, find out the swing in operative temperature. And find out the peak temperature in the final. Calculation: Area: External wall = 3.08m2, Internal wall = 40.88m2, Internal floor = 19.8m2 Ceiling (intermediate floor) = 19.8m2, Glazing (include. frame) = 7.0m2 Volume of room = 55.44m3 Summed values: Summed area = 90.56m2 Summed U Value = 22.1/WK-1 Summed U Value = 321.2/WK-1 First part Mean operative temperature: Solar Gain through glazing (Table 5.7): = 0.62 x 177 x 6.3 = 691.36W Internal heat gain: = (792 + 1280 + 1584) / 24 =152.33W Fabric heat gain (Table 2.34(h)): = (3.08 x 0.49 x 26.9) + (7 x 2.94 x 19.8) = 448.08W Total gains to environmental node: = 691.36 + 152.33 + 448.08 = 1291.8W Total gain to air node: = 0 + (55.4 x 19.8) = 1097.7W Room ventilation conductance (Table 5.2): =1/3 x 3 x 55.44 =55.44WK-1 Thermal response factor for the room: = (321.2 + 55.44) / (22.1 + 55.44) = 4.9 Room conductance correction factor; = 3 [55.44 + (6 x 90.56)] / 22.1 + (18 X 90.56) = 1.09 Mean operative temperature at center of room: = [1097.7 + (1.09 x 1291.8)] / [55.44 + (1.09 x 22.1)] = 31.51K Second Part- Swing in operative temperature: Swing in solar gain (Table 2.30 and Table 5.7): = 0.44 x 6.3 x (603 – 177) = 1180.9W Swing in structural gain (Table 2.34(h), and given time lag factor (9.5h)); = [ (0.18 x 3.08 x 0.49) x (11.7 – 26.9) ] + [ (1 x 7 x 2.94) x (24.8 – 19.8) ] = 98.77W Swing in internal gain; = [ (2 x 80) + ( 10 x 19.8) ] – 152.33 = 205.67W Swing in ventilation heat gain: = 55.44 x (24.8 – 19.8) = 277.2W Total swing in heat gain to environmental node: = 1180.9 + 98.77 + 205.67 = 1485.3W Total swing in heat gain to air node: = 0 + 227.30 = 227.30W Mean-to-peak swing in operative temperature Room admittance factor with respect to operative temperature; = 3 [ 55.44 + (6 x 90.56) ] / [ 321.2 + (18 x 90.56) ] = 0.92 The swing in operative temperature at 12:30: (at 12:30) = [ 277.2 + ( 0.92 x 1485.3) ] / [ 55.44 + (0.92 x 321.2) ] = 4.68K Final Part: Peak internal operative temperature: = 31.51 + 4.68 = 36.2 °C As the result, the temperature is too high in the office space, some issues of shading or cooling should be required to reduce the risk of overheat. Problem 2 2a) During project handover, the operational risk management cycle starts with the first implementation procedures by creating the risk inventory through risk identification and risk assessment. Starting with risk identification and assessment, the better the risk assessment and the risk information gathered is structured; the more successful will be the future continuing reassessment process. Good results for risk evaluation are achieved if unit heads and risk or process experts agree on the valuation of the risk. Then, risk mitigation and control system is carried out in view to adequately assessing the impact of an identified risk on the organization’s business, one has to consider existing controls and mitigating measures that already reduce the likelihood or severity of the risk scenario identified. A risk mitigating measure is usually a one-time measure for which an implantation date and a responsible person are defined. Risk scenario, mitigation measure, control, and loss event help to keep track of the implementation steps. These results in improved transparency, efficiency and data integrity compared to the widespread solutions that typically create problems with regard to user access rights, data integrity and confidentiality. Followed by risk mitigation and control system is risk controlling and reporting. The goal of the risk management process is to keep identified risks in line with the risk policy and risk strategy approved by the Board of Directors and the executive team. This process could assure existing controls are actually performed and newly approved risk mitigating measures are implemented as planned. Lastly, followed by the above steps of operational risk management processes, simple risk aggregation and consolidation methods can be introduced. Grouping risks by categories to look for worst-case risk scenarios, consolidating risks across business units and evaluating dependencies, correlation or diversification potential between risks can be introduced already with relatively simple methods and are an important step towards an integrated risk perspective. Based on the structured risk information gathered and the integrated perspective on all relevant risks, mitigation measures and implemented controls, the risk manager is able to produce risk reports according to the need of any type of management level. 2b) There are a number of elements involved in the development and implantation of operational risks. They could be divided into Pre-handover activities and post-handover activities. The following responsibilities should be worked among the project sponsor, building owners, contractors and maintenance providers. Regarding Pre-handover activities: First, developing commissioning program which including the calibrating, testing and running of building systems, services and equipment to ensure the building is ready for use. Sometimes, the manufacturer’s representatives may be present on site to authorize the operation of services and equipment. To make sure the services and equipment have been correctly installed and functioning. Calibrating the control instruments and systems to ensure energy conservation and environment conditions are maintained. Second, transferring of documentation to the client is involved in the development and implementation of operational risks. For example, in terms of building service, the building documentation may include: statutory authority permits and approvals, including progressive building certifier approvals. Providing plant, equipment, services and system information and schedules, including recommendations regarding lifecycle costing, â€Å"as-built† building plans and commissioning data, service maintenance requirements, operation and maintenance manuals covering design and operating parameters, service maintenance schedules, maintenance and cleaning products, tools and spare parts. Third, the project contractors should assist the building owner or maintenance providers to determine the building maintenance requirements. Forth, develop handover training program to familiarize the building owner and maintenance provider personnel with building equipment and systems. It is a good practice as training sessions coordination could utilize the expertise of the design and construction teams such as subcontractors. Effective training will let the building users and owners obtaining knowledge to manage the building and its fixtures, fit-outs, equipment, services and systems. The training contents may include occupational instructions and coincide with the handover of building documentation. Regarding Post- handover activities: First, identify outstanding defects and rectify all outstanding defects prior to final completion. If defects or omissions are identified by the building owner after final completion. Second, monitoring maintenance and update building asset records is involved in the implantation of operational risks. Most building contracts have a defects liability period, typically for twelve months from the practical completion. Therefore, maintenance activity should be monitored and maintenance records should be continually updated to reflect any new defects and rectification works. And these records should be added into a defects report, including the details of maintenance activities undertaken. The certificate of final completion confirms that all contractual requirements have been met, including the rectification or acceptance of all outstanding defects and attendance to all omissions. Forth, project files and accounts are to be closed which allow easy auditing in the future. Substantial records created or received by the design and construction team must be sorted, indexed and recorded to create an auditable project trail. Care must be taken to store all financial records securely. Undertake final completion inspection to ensure satisfactory rectification of all outstanding defects. Last but not least, update and maintain asset register and other relevant asset management systems. Problem 3 3a) Operating temperatures The electrical energy produced by biomass gasification CHP plants can be consumed directly or injected into the network. The production of thermal energy can be specified at below: High-temperature heat (steam or thermal oil, up to 200 ° C) applies for industries which consume heat. Low-temperature heat (hot water at 90-95 ° C) applies for industries which consume heat, urban heating networks by hospitals, schools, government bodies, swimming pools, and industries linked to the wood sector that have co-products and thermal energy requirements. Cost The capital costs of the biomass CHP processes are much higher than fossil fuel fired CHP systems. Small-scale biomass CHP is undergoing trials in the UK. Biomass CHP offers a carbon saving potential for large sites (e.g. over 20 MWe). At these scales, biomass CHP will typically use steam turbines linked to district heating. Environmental regulation / considerations To apply biomass CHP, several matters should be considered. Provide a suitable supply chain for biomass fuel. The site access for large lorries delivering the fuel and storage space for the fuel. The route and mechanism to transport fuel from the store to the boiler and the plant room space around the boiler for cleaning. Integration into the building engineering system Building systems are usually connected to the network via a heat exchanger. Whilst there is some amount of thermal loss from the heat distribution infrastructure, the aggregation of small heat loads from individual buildings into a single large load allows the use of large scale heat technologies. 3b) A district heating scheme comprises a network of insulated pipes used to deliver heat, in the form of hot water or steam, from the point of generation to an end user. District heating networks provide the means to transport heat efficiently. They can currently be built up to around 30km from generating plant and distribution networks can be hundreds of kilometers long. The development of the district heating scheme is benefit to the community include avoided costs of energy, through the use of surplus and wasted heat energy, and reduced investment in individual household or building heating equipment. Problem 4 4a) CBM is a short form Condition Based Maintenance. It is a maintenance strategy that adopted the actual condition of the asset to decide what maintenance needs to be done. It acts as a condition monitoring since it provides an instantaneous indication of a machine’s condition, ensuring critical systems maintained in top condition and spot the upcoming of plant failure. More, it helps improve the conventional maintenance regime by evaluating indicative parameters of plant condition such as temperature, vibration, oil condition, power quality. CBM is a highly effective maintenance strategy which benefits to safety and reliability nature industries such as aircraft industry, semiconductor manufacturing, nuclear, oil and power etc. The advantages examples are stated as following: First, it enhances fault detection in many plant items. Second, it reduces failure rates, labour time and repair budgets. Third, by carrying out the CBM, it gains the greater understanding of plant performance, and thus improves the energy efficiency and worker safety. 4b) As mentioned in 4a), there are a lot of benefits by adopting CBM. Below are the five different CBM methods examples which would help enhance fault detection in plant items and reduce their failure rates. First, acoustic emission monitoring which monitoring defect the naturally occurring high frequency structure borne elastic waves which are produced in materials under some form of stress. Acoustic emissions are the stress waves measuring in dB at high frequency 20kHz to 1 MHz. The instrument is commonly used to listen and measure the acoustic signals emanating from items such as pump’s bearing to define the condition with the plant during it operation. It has a good signal to noise ratio and is not affected by background noise. Second, Vibration analysis which forecast the condition for most machines with moving parts and all rotating machinery has a degree of vibration due to difficulties in balancing the moving parts. For example, bearing degradation and misalignment, to assess plant condition to enhance fault detection and reduce failure rates. It measured in dB at lower frequency range of 100Hz to 10KHz. When faults begin to appear in plant items, the normal vibrations begin to show signs of change. When these vibration measurements are â€Å"trended† over a period of time, the change in the plant conditions can be seen as a graphical representation. It can indicate when lubrication is required, whether the lubrication has been successful and the condition of bearings. Moreover, any misalignment, loose components and other problems that cause the machine to vibrate can be detected, giving maintenance staff the chance to intercept faults and maximise the effectiveness of these tasks and their time. Third, application of Ultrasonic thickness testing uses complex electronic equipment to generate and detect reflections of ultrasonic vibrations from interfaces between materials. Any material that transmits mechanical vibrations can be tested. It is the best method in terms of cost-effectiveness and the ability to detect irregularities in a metallic system. For example, it can read its thickness by simply touching the steel with the measurement head. Contact is usually assured by first removing visible corrosion scale and then applying petroleum jelly or another couplant before pressing the probe against metal. It could detect the occurrence of pitting and cracks both internally and externally resulting from corrosion, microbial and chemical contamination and general wear and tear. Therefore, it avoids the possibilities of leaking and potential failure of critical systems. More importantly, the testing is used to inspect metal to determine quality and safety without destroying or compromising its integrity. Forth, Thermography could be used to evaluate plant condition by obtaining temperature observations of building service pant. The deviation in temperature at which particular pieces of plant operate is often indicative of plant condition. The radiation emitted from the surface of an object is a function of the object temperature with the infrared element of the radiation being measured and converted into an equivalent temperature. The thermal image is constructed from a multitude of point measurements. And the point temperature values are represented on a grey or colour scale. Last, Lubricant and fluid analysis. Microbes can induce corrosion of steel and non-ferrous metals or they can accelerate normal electro-chemical corrosion processes. This mechanism can be occurred directly or indirectly. The analysis will reveal things like oil contamination, incorrect fill levels, as well as a breakdown or degradation of the lubricant’s composition. The procedure is performed by taking a small sample of the lubricant from the machine in question and sending it to laboratory for aassessment of the presence of the organism. 1

Price Discrimination

Price discrimination Price discrimination is the practice of charging a different price for the same good or service. There are three of types of price discrimination – first-degree, second-degree, and third-degree price discrimination. First degree First-degree discrimination, alternatively known as perfect price discrimination, occurs when a firm charges a different price for every unit consumed. The firm is able to charge the maximum possible price for each unit which enables the firm to capture all available consumer surplus for itself.In practice, first-degree discrimination is rare. Second degree Second-degree price discrimination means charging a different price for different quantities, such as quantity discounts for bulk purchases. Third degree Third-degree price discrimination means charging a different price to different consumer groups. For example, rail and tube travellers can be subdivided into commuter and casual travellers, and cinema goers can be subdivide int o adults and children.Splitting the market into peak and off peak use is very common and occurs with gas, electricity, and telephone supply, as well as gym membership and parking charges. Third-degree discrimination is the commonest type. Necessary conditions for successful discrimination Price discrimination can only occur if certain conditions are met. 1. The firm must be able to identify different market segments, such as domestic users and industrial users. 2. Different segments must have different price elasticities (PEDs). 3.Markets must be kept separate, either by time, physical distance and nature of use, such as Microsoft Office ‘Schools’ edition which is only available to educational institutions, at a lower price. 4. There must be no seepage between the two markets, which means that a consumer cannot purchase at the low price in the elastic sub-market, and then re-sell to other consumers in the inelastic sub-market, at a higher price. 5. The firm must have so me degree of monopoly power. Video Diagram for price discriminationIf we assume marginal cost (MC) is constant across all markets, whether or not the market is divided, it will equal average total cost (ATC). Profit maximisation will occur at the price and output where MC = MR. If the market can be separated, the price and output in the inelastic sub-market will be P and Q and P1 and Q1 in the elastic sub-market. When the markets are separated, profits will be the area MC, P,X,Y + MC1,P1,X1,Y1. If the market cannot be separated, and the two submarkets are combined, profits will be the area MC2,P2,X2,Y2.If the profit from separating the sub-markets is greater than for combining the sub-markets, then the rational profit maximizing monopolist will price discriminate. Market separation and elasticity Discrimination is only worth undertaking if the profit from separating the markets is greater than from keeping the markets combined, and this will depend upon the elasticities of demand in the sub-markets. Consumers in the inelastic sub-market will be charged the higher price, and those in the elastic sub-market will be charged the lower price.

Find Out Whos Discussing Generation Google Scholarship Winning Essay Samples and Why You Need to Be Worried

Find Out Who's Discussing Generation Google Scholarship Winning Essay Samples and Why You Need to Be Worried The Basics of Generation Google Scholarship Winning Essay Samples When these essays may seem to be a little step toward your future, they're a step nonetheless. A number of them also expressed confidence they would have the ability to pass the writing test. It really depends upon the applicant or writer with regard to the preferences and interests of the institution you're applying to. Fortunately, you've come to the proper place to discover the best remedy to every single academic writing problem that you're currently facing with your essay. The One Thing to Do for Generation Google Scholarship Winning Essay Samples Without knowing appropriate essay making, your probability of going into a very good college are slim. To have the very best chance at winning scholarships, you have to understand how to begin your essay off perfect. If you want more money to cover coll ege, odds are you will be applying for several college scholarships. If you're asking for a scholarship, odds are you're likely to should compose an essay. While it's the case that there are a few excellent writers in college some find it extremely challenging to write. The sort of essay you're looking for will be provided to you within the deadline provided to you. You can also order an essay on this site, and our professional writers can help you to receive your fantasy scholarship. Now you can purchase genuine college essay online, one that is going to fit your financial plan and get your work done also. Some say it's an issue of substance, but others point to the format and writing techniques. In addition, the work differ from topic to topic since there are essays that enable you to dig deeper into your creative minds. You don't need to use exactly the same words, so long as you repeat the principal themes. Both examples handle the identical theme (sick parent) but utilize various approaches. Who Else Wants to Learn About Generation Google Scholarship Winning Essay Samples? Furthermore, you may download our free guide for m ore advice on the best way to locate scholarships to study abroad. You may easily depend on us to find essay help as we have a tendency to assist and guide the students with the aid of our professional experts. Not everybody can afford superior education, and that's why some individuals decide to join the institution's scholarship program. Select an intriguing topic This is among the most crucial sides of your scholarship essay. Obtaining scholarship is just one of the greatest approaches to attain education and training to develop into a superior leader. Studying only will help improve your abilities. The Secret to Generation Google Scholarship Winning Essay Samples Well, this is your opportunity to learn! I want to study the methods by which people could lower their footprint and safeguard the nature. Local folks may also help me learn. So for people who need assistance with writing, we've only the people they require! It may help you brainstorm some suggestions for your next scholarship essay. Then the very best way is set a request I want to acquire essay papers written. Since you may see, this is a completely different way to compose an essay. A great essay is one which leaves an enduring impression. In a nutshell, the meat of the essay was not there. These forms of essays are guaranteed to doze off your readers. It looks like the simplest part of an essay, but somehow it inevitably turns out to be the absolute most difficult for many people. Be sure to follow along with the correct format, consisting of the general components of an essay. An additional secret is that for us, you aren't average. It requires something that may be used for the subsequent thousand years without getting old. There's nobody approach to compose a winning scholarship application. It was time to get ready for writing. Writing quality essays is the principal purpose of our services. Custom writing means a severe company with high standards. To purchase essay online, you merely will need to fill in the application form and you'll get superior work on the desired topic. Writing is a present that comes naturally. Lies You've Been Told About Generation Google Scholarship Winning Essay Samples It is believed to be absolutely the most significant part your application, since the scholarship committee will use this to assess who you are as an individual, and your outlook in life. Service has ever been part of my life. Some universities and organizations set a particular format, while some supply you with the freedom to produce your own.

reaction essay about cinderella man - 1210 Words

ENIEI 124 – Oral Communication Intensive English Institute Ball State University Muncie, IN IEI Course Syllabus ENIEI 124-2D Kevin Daily MTWR 1:50-2:50 LB 127 Fall 2013/ Session 6 Office: RB 389 email:kmdaily@bsu.edu Office hours: MTWR 1:00 PM-1:45 PM, TR 4:00 PM– 4:45 PM and by appointment Brief Course Description Students will be able to build useful, communication skills in English in the United States through exploration and reflection of everyday readings and experiences. The class will be enriched by students’ own thoughts, traditions and cultures. Then they will be able to compare and contrast them with the North†¦show more content†¦Ball State University Class Attendance policy: (published in undergraduate catalogue-â€Å"Class Attendance†). A student’s official course program is regarded as a contract with the university. Since full performance requires, in part, regular and punctual class attendance, students are expected to attend all classes for which they are registered. Faculty will establish attendance policies for their courses and communicate those policies through course syllabi or outlines. Students who know they must be absent from a class should notify the instructor or departmental office. Courtesy requires that students speak to the instructo r and preferably present a signed and dated memo briefly stating the reasons for absence. Faculty members are responsible for keeping records of attendance of all students registered in each class. Students are responsible for completing any work they have missed. The faculty member is not required to do extra teaching to help students â€Å"catch up.† Holiday Observances: The IEI Department follows and observes all holidays and break periods identified by the University throughout the academic year and are considered excused absences. These dates can be found on the Ball State website calendar link. Other observances not identified by Ball State, such as those holidays and observances based on cultural customs, are not considered by the IEI department and the University as excused absences when students choose to remain absentShow MoreRelatedMale Gaze Essay2595 Words   |  11 Pageswoman but there is no such response for women. Men also have more linguistic power over women due to their social status in modern society. In more current times men have turned to visual arts to implement their control and power over women. In this essay I hope to demonstrate how women are and have been portrayed in relation to the ‘male gaze’ and how it is still very prevalent in contemporary modern culture through photography and other mediums, such as, cinema and advertising. I will be analyzingRead MoreFilm Review : Pretty Woman1827 Words   |  8 Pages In this essay I will aim to discuss and evaluate the film ‘Pretty Woman’ and how this film relates to feminist theories. Ways in which female and male characters are represented differently. It presents the relationship of a man and woman as one which is patriarchal and a very outdated. Feminism is the belief that all women should be allowed to portray the same rights and power as men do. The film Pretty Woman is a classical modern day story where the unfortunate girl meets a man who then turnsRead MoreDisney s Evolving And Adapting Their Ideologies And How Is Frozen s Narrative Challenging Patriarchal Themes?2353 Words   |  10 Pagesregarding a woman’s role in the household. The embedment of these ideologies from young ages consequences to them being engrained into the adult mind. For example, the concept of having a one soul mate or prince charming is a Disney ideology. This essay will discuss the Disney gender socialization a child is exposed to from young ages and how Disney is developing these ideologies from Snow White, to Beauty and the Beast, to the modern Brave and Frozen. The Disney timeline begins with Snow WhiteRead More Its Time For a Gay or Lesbian Disney Hero Essay2646 Words   |  11 PagesThe Walt Disney Company is well-known the world over for its magical â€Å"once upon a times† and wholesome â€Å"happily ever afters.† Stories like Cinderella, Snow White, and The Little Mermaid all feature captivating tales of beautiful young women who are pure of heart seeking adventure and true love. Disney paints the picture of a strong sense of faith and love, which act as guiding forces that provide access to a lifetime of happiness. Unfortunately, these stories all lack a crucial sense of diversityRead More Kurt Vonnegut’s Slaughterhouse-Five Essays3848 Words   |  16 PagesHiroshima and Nagasaki combined† (qtd. in Rense). Vonnegut saw a â€Å"mountain of dead people† in Dresden. â€Å"That makes you thoughtful,† he said; â€Å"It†¦made†¦you think about†¦death† (qtd. in Roloff). Years passed during which Vonnegut grappled with these thoughts of the Dresden problem and the fact that â€Å"there is nothing intelligent to say about a massacre† (Vonnegut, Slaughterhouse-Five 24). Finally, in 1969 Vonnegut published his anti-war masterpiece under the title of his prison address in Dresden: Slaughterhouse-FiveRead MoreThe Magic Toyshop by Angela Carter1954 Words   |  8 Pageshas been categorised as some as Magic Realism. In a Concise Glossary of Contemporary Literary theory this has been defined as â€Å"involve the sudden incursion of fantastic or magical elements into an otherwise realistic plot and setting†3. In this essay I will discuss how Carter exploits the fluid boundary between reality and fantasy. As stated above it can be said that The Magic Toyshop adapts narrative conventions borrowed from fairy tales I.e. there is an orphaned protagonist who has to leaveRead MoreWizard of Oz as a Fairytale Essay4056 Words   |  17 Pagesestablished we must then consider what constitutes a fairytale. Does it possess distinctive structural, stylistic or temporal features? What gives it its generic status and demarcates it from other forms of childrens literature? Part of this essay will focus on these and similar questions with the aim of ultimately concluding whether Frank L. Baums 1900 novel The Wizard of Oz (Oz) can feasibly rank within the generic confines of fairytale. Initially, though, as opposed toRead MoreEssay about Happy Endings True Love8166 Words   |  33 Pagesas a whole. -Raymond Bellour (Bellour, 1974, 16) You dont want to be in love - you want to be in love in a movie. -Becky, Sleepless in Seattle Reality and love are almost contradictory to me. -C#233;line, Before Sunset This essay is primarily concerned with the concept of the Hollywood romance happy ending. On a broader scale, it is also concerned with addressing the relationship of these endings to something which (I think it is fair to say) most believe Hollywood seldom attemptsRead MoreFrankenstein Study Guide14107 Words   |  57 Pagestwo-part Study Guide that contains a variety of resources for both you and your students. Use the Guide to plan your instruction of the work and enrich your classroom presentations. In For the Teacher you will find these time-saving instructor aids: †¢ About the Work: pertinent background information on the work and a detailed synopsis of its plot. †¢ Media Links: annotated listings of audio, visual, electronic, and print resources related to the work. †¢ Teaching Options: high-interest activities for introducingRead MoreKhasak14018 Words   |  57 Pagescontributed six novels, seven collections of short stories, six collections of political essa ys and a volume of satire. He has also translated his own works into English. He was a true visionary and India’s foremost fabulist in the recent past. His writing is as evocative as that of William Cuthbert Faulkner and Gabriel Garcia Marquez. Speaking of his enormous range one can notice his transition from the angry young man to the mature transcendentalist in his novels. His economy of words, intensive brooding